8
How to Connect Power and Data Control
How to Connect Power and Data Control
The MA6300 has the ability to automatically switch
power On/Off to McIntosh Source Components via
the Power Control connections. The Data Port Con-
nections allow for the remote operation of basic
functions using the MA6300 Remote Control. For
additional information refer to “Connector and Cable
Information” on page 4.
1. Connect a Control Cable from the MA6300 POW-
ER CONTROL Jack to the Power Control In on the
McIntosh SACD/CD Player.
2. Connect a Control Cable from the McIntosh SACD/
CD Player Power Control Out Jack to the Power
Control In jack on the McIntosh Tuner.
3. Connect a Control Cable from the MA6300 CD1
DATA PORTS Jack to the McIntosh SACD/CD
Player Data In Jack.
Note: If the CD2 unbalanced Audio Inputs are used in-
stead of the Balanced CD1 Inputs, then connect
the Control Cable to the CD2 Data Port.
4. Connect a Control Cable from the MA6300 TUN-
ER DATA PORT Jack to the McIntosh Tuner Data
In (Tuner 1).
5. Connect any remaining McIntosh Source Compo-
nents in a similar manner.
Note: With the addition of a McIntosh Power Control-
ler and Remote Control Translator connected to
the MA6300, any McIntosh Classic Components
and/or non McIntosh Components connected to
the MA6300 can be operated more conveniently.
Contact your McIntosh Dealer for additional
information.
McIntosh SACD/CD Player
McIntosh Tuner
