13
Power
Press the Power push-button and the zone will turn on with
either the default or programmed signal source and volume
level. Press the Power push-button a second time to turn
the zone off.
Note: Operations in remote zones can be performed by
pressing a push-button on a keypad or remote control.
Refer to figures 3 and 4
Source Selection
Select and operate any available signal source by pressing
the appropriate keypad or Remote Control push-button.
Volume
The turn on volume level can be changed by pressing an up
or down volume push-button.
System Off
Normally remote zones are turned on and off individually
in each respective zone by pressing the Power push-button
on a keypad or remote control. If you desire to turn off all
zones of an entire CR12 system simultaneously, including
a control center and accessory components, you can press
the Sys Off push-button. You can also turn off the entire
system in any remote zone by pressing the Sys Off push-
button on a keypad or remote control.
Note: Individual remote zones should normally be turned off
with the Power push-button since there
may be other zones in use that would
automatically be turned off by the Sys Off
push-button in a specific zone.
Dedicated zone source components
If a specific CR12 zone has a source compo-
nent dedicated exclusively to that zone, it can
be operated in that zone with a keypad or re-
mote control. When a dedicated zone source
component is connected, it replaces the source
component that is connected to the CR12 Aux
inputs. If the CR12 is connected with a Control
Center which has a source component con-
nected to its Aux inputs, that component will
not be available in the zone with the dedicated
source component.
How to Operate in Remote Zones
How to Operate in Remote Zones
Figure 3
Figure 4
Note: The shaded push-buttons operate with the CR12 as well as
with a McIntosh Control Center connected to the CR12.
The push-buttons shown in black only operate functions on
McIntosh Control Centers. The white push-buttons are
operational with other McIntosh models which also use the
HR033 Remote Control.
