20
Source Selection
Rotate the INPUT Control to select the desired source
or press the INPUT Up
p
or Down
q
Push-button on
the Remote Control. Refer to figures 60, 62 and 63.
Volume Control
Rotate the Front Panel VOLUME Control or use the
VOLUME Up
p
or Down
q
Push-buttons on the Re-
mote Control for the desired listening level. Refer to
figures 60 and 63.
Trim Functions
The C52 has seven different Trim Selections with Ad-
justments. The Trim Selections include Balance, Input
Trim Level, Mono/Stereo Mode, Equalizer Mode,
Power On and Off
The Red LED above the STANDBY/ON Push-button
lights to indicate the C52 is in Standby mode. To
switch ON the C52, press the STANDBY/ON Push-
button on the Front Panel or the (Power On)
Push-button on the Remote Control. The C52 will go
through a brief startup initialization with the Front
Panel Information Display indicating the last used
source and volume setting, this is followed by the
volume setting indication starting at zero and then
increasing to the last used volume setting. Refer to
figures 60, 61, 62 and 63. To switch OFF the C52 press
the STANDBY/ON Push-button on the Front Panel or
the OFF Push-button on the Remote Control.
Note: For an explanation of the Remote Control
Push-button functions, refer to pages 10 and 11.
Meter Lights, Display Brightness,
Phono Cartridge (MC & MM)
Loading (when the Input is Se-
lected) and when Headphones are
connected HXD Mode. The Trim
Settings are stored in memory
independently for each Input
Source Selected, except the Meter
Illumination and Display Bright-
ness settings of On or Off, which
are the same for all inputs.
Note: Selection and Adjustment of
all Trim Functions may be
performed by pressing the
Front Panel INPUT Trim
Control and then rotating
it to select the desired Trim
Function. Then use the
VOLUME Adjust Control to
change the setting. Remote
Control TRIM Push-Button
together with the
LEVEL
UP / Down Push-button
may also be used.
Refer to
figures 60 and 63.
BALANCE
Listening balance varies with
different program sources, room
acoustics and listening positions
relative to the Loudspeakers. Use
the Balance (Trim Function) as
needed to achieve approximately
equal listening volume levels in
each Loudspeaker. To adjust the
Balance perform the following:
1. Press the TRIM Push-button repeatedly on the
How to Operate the C52
Figure 60
Figure 61
INPUT: BAL 1
15%
Figure 62
INPUT: MC PHONO
30%
Figure 63
