8
Rear Panel Connections
DATA PORTs send
control signals to
compatible source
components allowing
remote operation thru
the C46 System
POWER CONTROL
MAIN Output sends
a turn-on trigger to a
McIntosh Power Am-
plifier when the C46
is switched On
POWER CONTROL 1
and 2 Outputs send
turn-on triggers to a
McIntosh Power Am-
plifier when the C46
Front Panel Output 1
and/or 2 is On
MAIN Balanced
OUTPUTS contain
Listen program
signals at all times
1 and 2 Balanced OUT-
PUTS contain Listen
signals and turn On/Off
with the front panel
OUTPUTS Push-but-
tons
LISTEN OUTPUTS
MAIN contain Listen
Program Signals at all
times, OUTPUTS 1 and
2 contain Program Sig-
nals and switch On/Off
with the Front Panel
OUTPUTS Push-buttons
LISTEN
PROCESSOR
FROM and TO
allows an external
signal processor to
be connected for
use in the Listen
Mode
RECORD
PROCESSOR FROM
and TO allows an ex-
ternal signal proces-
sor to be connected
for use in the Record
Mode
CD balanced INPUTS ac-
cept high level program
source signals
TAPE, VCR, SAT,
DVD, CD2 and TUNER
INPUTS accept high
level program source
signals
TAPE and VCR
OUTPUTS contain
record out signals
AUX accepts high level
program source signals,
PH accepts signals from a
Moving Magnet phono
cartridge, and the small
slide switch selects which
one of these two inputs is
active when either Front
Panel LISTEN or
RECORD Switch is set to
PHONO or AUX
POWER CONTROL
ACC Output sends a
turn-on trigger to a
McIntosh Source
Unit when the C46 is
switched On
Connect the
power cord to a
live AC outlet.
Refer to informa-
tion on the back
panel of the C46
to determine the
correct voltage
Main Fuse holder,
refer to informa-
tion on the back
panel of the C46
to determine the
correct fuse size
and rating
Gound connection
for turntables
The EXTernal
SENSOR Jack
permits the
connection of a
McIntosh IR
Sensor for re-
mote operation
