How to Connect
Rear panel input jacks are provided for 2 stereo
high level sources (AUX 1 and AUX 2), a stereo tuner
(TUNER), 2 stereo turntables (PH 1 and PH 2), stereo
high impedance microphones (MIC), and 2 stereo
tape recorders (TAPE 1 and TAPE 2).
Rear panel output jacks are provided to feed 2
stereo tape recorders (TAPE 1 and TAPE 2), a stereo
600 ohm unbalanced line (LINE) and 2 stereo 2.5 volt
outputs (MAIN).
Front panel jacks provide input and output
facilities for a tape recorder using the circuits of the
rear panel TAPE 2 connections. Two headphone
jacks are provided which are fed by a stereo
amplifier in the C 29.
CONNECTING AUX 1 AND AUX 2
Connect the left channel cable from any high level
source (tuner, TV set, tape recorder, etc.) to the IN-
PUT AUX 1 left jack. Connect the right channel cable
to the INPUT AUX 1 Right jack. A second high level
source can be connected similarly to INPUT AUX 2.
CONNECTING TURNTABLES
The C 29 has shorting plugs in the phono inputs.
To prevent unwanted noise remove the shorting
plugs only from input jacks that are to be used. Con-
nect the cable from the left channel of the turntable
into the INPUT PHono 1 left jack. Connect the cable
from the right channel of the turntable into the IN-
PUT PHono 1 Right jack. For a second turntable,
connect PHono 2 in the same way, after removing
the shorting plugs.
CONNECTING MICROPHONES
Connect the cables from high impedance
microphones directly in the INPUT MIC Left and
Right jacks.
CONNECTING TAPE RECORDERS
To Record:
Connect a cable from the OUTPUT TAPE 1 Left
jack to the left high level input of the tape recorder.
Connect a cable from the OUTPUT TAPE 1 Right jack
to the right high level input of the tape recorder. Con-
nect a second recorder in the same manner to the
OUTPUT TAPE 2 jacks.
To Playback/Monitor:
Connect a cable from the left channel output of a
tape recorder to the TAPE INPUT 1 Left jack. Con-
nect a cable from the right channel output of a tape
recorder to the TAPE INPUT 1 Right jack. Connect a
second recorder in the same manner to the TAPE IN-
PUT 2 jacks.
Front Panel Tape Recorder Jacks:
Tape recorder inputs and outputs are available at
the TAPE IN-OUT jacks on the front panel just to the
left of the TAPE MONITOR pushbuttons. These
jacks make connections to TAPE 2 facilities without
having to go to the rear panel. A metal shielded 1/4
inch stereo phone plug is used. Connections are tip:
left signal, ring: right signal, and sleeve: common
ground.
4
