McHale
Fusion Vario
Baler & Wrapper
84
7.5.3 Net settings
Bale diameter
This can be set from 60 - 168 cm. (Wrapping is
automatically disabled if the diameter is below 100 cm
& above 145 cm)
Bale density
The bale density can be set from 1 to 10.
Core diameter
Sets the bale core size.
Core density
Sets the bale core density.
Net layers
This setting determines the amount of net layers to be
applied to each bale. It ranges from 1.1 to 9.9.
Net delay
This setting sets the delay from the ‘bale full’ beeper to
the point when net feeds into the chamber. It ranges
from 0 - 9.9s.
Net stretch
This setting sets the stretch on the net applied to each
bale, depending on the option selected. The setting
ranges from 1 (min) to 10 (max).
