7
● Connecting to microphones or other input devices
◆
Connecting to microphones:
By connect the instrument to microphone via
【
MIC
】
jack, you can sing
the songs while play keyboards.
◆
Connecting to other input devices: The instrument is equipped with build-in stereo input function.
You can use the instrument as a broadcaster by connecting it to your mobile phones, MP3, computers
or any other input devices. When connecting, first turn off the instrument and plug the right end of
audio cable into either side of
【
AUDIO INPUT
】
jack on rear-panel and the other end to external device,
and then turn on the instrument again.
III. Basic Operation
Press the
【
POWER
】
switch to turn on the instrument with “120” appearing on the LCD screen. The
instrument cannot be played until “120” displays. The instrument is equipped with power saving
function. The instrument will automatically enter the sleeping mode without being touched or
operated for 15 minutes. All parameters will be reset after entering the sleep mode. You can press ANY
button to wake up the instrument.
● Master Volume
Press the
【
MASTER VOL+
】
or
【
MASTER VOL-
】
button to increase or decrease the master volume.
Pressing
【
MASTER VOL+
】
and
【
MASTER VOL-
】
simultaneously will reset the master volume to the
default value. Adjustment of master volume will also have impact on ACMP volume.
● ACCOM Volume
Press the
【
ACCOM VOL+
】
or
【
ACCOM VOL-
】
button to increase or decrease the ACCOM volume.
Pressing
【
ACCOM VOL+
】
and
【
ACCOM VOL-
】
simultaneously will reset the ACCOM volume to the
default value.
● Selecting Timbres
You can select timbres at initial interface or press
【
TIMBRE
】
button to call up Timbre Operation. The
instrument features 255 timbres from code 000 to 254. You can change the current timbre by pressing
the numbers or
【
+
】
/
【
-
】
in the numeric pads.
Summary of Contents for EK-6100
Page 5: ...5 Timbre List Rhythm List...
