12
Customer helpline
0345 605 2065
Prepare
Assemble
1.CABLE STRAIN RELIEF (See Fig. A)
This product is designed with a cable strain relief that prevents the extension cord from being pulled
loose while using.
● Form a loop with the end of the extension cord.
● Insert loop portion of extension cable strain relief opening in the bottom of the rear handle and
place over cable strain relief .
● Slowly pull loop against cable strain relief until the slack is removed.
The hedge trimmer has been already assembled, You needn’t to assemble.
A
Always take care when removing the packaging to prevent damage to you or to the hedge trimmer.
IMPORTANT!
Before assembling the hedge trimmer, check all the parts indicated in the manual are in
the box. Inspect all the parts for signs of damage. Do not assemble the hedge trimmer if you observe
any damaged components.
NOTE:
Before using the tool, read the instruction book carefully.
Remove all parts of the hedge trimmer from the box and carefully remove all packaging. Take care not
to lose any instructions which may be attached to the tool, these provide important information which
will be required while assembling the hedge trimmer.
WARNING!
Take great care when doing this as the blade has a very sharp cutting edge .
Assembling instructions
Preparing instructions
