27
Customer Helpline
0345 605 2063
Mowing advice (continued)
Transportation
Storage
Maintenance
IMPORTANT!
Before you remove the grass collection box, switch off the motor and wait
until the blade reaches a complete standstill.
To remove the grass box, lift open the grass box lid and lift up the grass box.
Do not remove grass cuttings in the hover casing or on the cutter by hand or with your feet.
Instead use suitable tools such as a soft brush. To ensure excellent hover performance and
powerful grass grass collection regularly brush clean the vents under the grass box which
allow air into the hover fan (impeller). The grass box should be cleaned after use. This will
ensure the air is able to flow freely through it.
Only fit the grass box when the motor is switched off and the blade is not moving. Lift open
the grass box lid and position the grass box correctly. Ensure it fits snug against the body
of the hover and that the lid closes completely on to the grass box before starting. It is
important the grass box is fitted correctly to vacuum the grass clippings.
• Switch the product off and disconnect from power supply.
• Protect the product from any heavy impact or strong vibrations which may occur during
transportation in vehicles.
• Secure the product to prevent it from slipping or falling over.
• Switch the product off and disconnect from power supply.
• Clean the product as described above.
• To reduce storage space, the upper handle can be folded down, unscrew the wing nuts
by approximately 6 revolutions.
