Page 13
For technical questions, please call 1-888-866-5797.
Item 64857
Sa
F
ety
Opera
ti
O
n
Maintenance
in
S
talla
ti
O
n
emergency Depressurization
If it is necessary to quickly
depressurize
the Compressor, turn the Power Switch OFF�
Then, pull on the ring on the Safety Valve to quickly release stored air pressure�
automatic Shut off System
1� If the Compressor automatically shuts off
before reaching its normal cutoff pressure:
a� Shut off all tools�
b� Turn Power Switch OFF
c� Unplug Compressor�
d� Wait until the Compressor cools down
(about 10 minutes);
e� Plug in Compressor�
f� Turn Power Switch ON�
g� Resume operation�
2� Possible causes of repeated automatic
shut off of the compressor are:
a� Using an extension cord that
is too long or narrow;
b� An air leak or open hose causing the compressor
to cycle too often and build up heat�
c� Turning Air Compressor off and
on again too quickly�
3� Correct any issues before further use to
avoid damage to the compressor�
