McGill utrac MR18, Owner'S Manual

Page: 16 / 30

16
Towing
●
Use only with a machine that has a hitch for towing. Attach equipment only using
the hitch point located at the front of the tractor
●
Follow manufacturer recommendations for weight limits and equipment
●
Avoid exceeding weight limit
●
Use extra care on slopes; the weight of towed equipment may cause loss of traction
●
Drive and stop slowly
●
Never shift to neutral and coast downhill
Flat Tire
Front Tires
The front wheels can be easily removed with a long nose plier to be replaced or to be maintained
Rear Tires
1.
Use a hydraulic jack and place it under the transmission
2.
Pump the hydraulic jack just enough to raise the tractor
3.
Stop pumping and make sure the jack has good
and safe contact with the tractor, as well as good
contact with the ground
4.
Keep pumping until the wheel is about 5 inches
from the floor
5.
Unscrew the nuts with a lug wrench.
6.
Replace tire
7.
Screw back the nuts in a star order (opposite
sides, as seen in the following figure)
8.
Drop the tractor slowly to the ground and
remove the jack