4 - 3
Special Operations - 3 Jaw
Removing Heater and Facer
To Remove the Facer:
Remove the two bolts that attach the facer splice plate to the facer.
Rotate the facer pivot arm away from the facer.
Disconnect the facer hydraulic hoses.
Attach a lifting sling to the lift point on the facer and lift the facer
from the carriage.
In order to use the facer in an in-ditch operation, the bracket
that rests on the carriage guide rods must be exchanged with an
in-ditch facer bracket that in stored on the facer stand.
Remove the two bolts that hold the bracket in place.
PH
04
76
3-10
-8-12
PH
04
75
2-10
-8-12
PH
04
77
7-10
-8-12
PH
04
75
7-10
-8-12
PH
04
77
6-10
-19-12
