7 - 2
Maintenance
Clean Eyebolt Threads
Keep the clamp knob eyebolt threads brushed clean.
Clean Jaws and Inserts
To prevent slippage and insure proper alignment, the jaws and
inserts must be clean.
Clean the jaws and inserts of any dirt or residual material using a
stiff-bristled brush.
Clean Thrust Bearings
The thrust bearings located in the clamp knobs must turn freely.
Wash the clamp knob bearing assembly with a solvent, and then
lubricate with 30W or lighter oil.
Check Gauges
Gauges should be checked daily.
The gauge should read zero when the unit is not running.
Damaged gauges should be replaced.
PH
02
97
7-
3-18-0
5
PH
02
68
7-
3-8-0
4
PH00
37
7-9-14
-9
4
PH00
37
7-9-14
-9
4
TX02291-3-8-04
TX00433-9-15-94
TX00434-9-13-94
TX00435-9-13-94
