7 - 1
Maintenance
Change Hydraulic Fluid and Filter
The hydraulic filter should be replaced when the indicator gauge
reads between 20 psi (138 kPa) and 25 psi (172 kPa) (yellow
range).
Fluid should also be changed as extreme weather conditions
dictate.
Refer to the "Hydraulic Fluids" section of this manual for hydraulic
fluid recommendations.
Washing the Machine
Cover plugs and electrical control boxes before washing.
The machine should be cleaned, as needed with a soap and
water wash.
Do not pressure wash.
TX00429-03-31-16
Check Hydraulic Fluid
The hydraulic fluid level should be checked daily.
If hydraulic fluid is not visible in the sight gauge, fluid must be
added between top and bottom of the sight gauge.
Refer to the "Hydraulic Fluids" section of this manual for hydraulic
fluid recommendations.
Never allow dirt, water, or other foreign matter to enter the tank.
Use only clean oil from an unopened container.
Preventative Maintenance
To insure optimum performance, the machine must be kept clean
and well maintained.
With reasonable care, this machine will give years of service.
Therefore, it is important that a regular schedule of preventive
maintenance be kept.
Store machine inside, out of the weather, whenever possible.
CD0014
2-11-
2-
94
CD0017
8-9-15-9
5
PH
02
97
4-
3-0
8-0
5
PH
02
97
5-
3-18-0
5
TX00428-8-10-95
TX02273-05-06-14
TX02274-3-8-04
