3 - 2
Operation
Starting the HPU
Check that the fuel tank is full of clean unleaded gasoline. Check
that the air cleaner element is clean.
Make sure the fuel cut off valve under the air cleaner is open (
A
). It
is open when the black lever is in line with the fuel line. Set the red
throttle lever on the engine to start.
Pull the starter grip lightly until you feel resistance then pull briskly
a full stroke. Return the starter grip gently (do not allow it to snap
back against the engine).
After the engine starts, gradually move the throttle to fast (
F
) position
as the engine warms up. To restart a warm engine put the throttle
lever at fast (
F
).
To stop the engine, move the red throttle lever to the stop position.
The engine should be started each time the Pipe Stand is to be
adjusted and then stopped.
To stop the engine at the end of the work day, put the lever at the
slow position (
S
). Turn the black fuel valve lever to the off position
(perpendicular to the fuel line).
TX03061-1-25-10
Machine Controls
The machine is hydraulically actuated and the controls are on a
podium next to the HPU. Ensure that all personnel and equipment are
clear of the unit before actuating it.
The left lever (
A
) controls the transverse movement. Pushing the left
control lever up makes the trolley move away from the control podium.
Pulling the left control lever down makes the trolley move toward the
podium.
The right lever (
B
) controls the boom vertical movement. Pushing the
right control lever up raises the boom. Pulling the right control lever
down lowers the boom.
TX03062-3-2-10
PH
0404
3-
2-
2-
10
PH
0404
5-
2-
2-
10
A
B
PH
0404
4-
-2
-2
-1
0
S
F
PH00
82
3-
4-
26
-9
6
A
Summary of Contents for MegaMc
Page 32: ......
