McElroy MegaMc, Operator'S Manual

Page: 12 / 32

2 - 1
Overview
MegaMc Pipe Stand
Parts of the Pipe Stand
1. Base Frame – supports the machine and rests on the ground.
2. Trolley – moves transversely and supports the boom.
3. Wheels – support trolley and allows transverse movement.
4. Boom – moves vertically and supports the rollers.
5. Rollers – support pipe and allow axial movement.
6. Pillow Block Bearings – supports rollers and allows them to roll.
7. HPU – Hydraulic Power Unit.
8. Controls – two levers to control movement.
9. Counter Balance Valve - hydraulically holds and regulates lowering of load.
10. Lift Cylinders - cylinders that raise or lower the boom
11. Guard Rail - guards the HPU and controls, and is used when stacking two pipe stands.
12. Transverse Cylinder - cylinder that moves the trolley toward or away from the operator.
13. Lifting Sling - used for lifting of the pipe stand. The lifting sling has a storage area inside the trolley tube.
14. Fork Pocket - used when lifting the pipe stand with a fork truck.
15. Literature Compartment - stores manuals.
TX03058-3-2-10
13. Lifting Sling
(inside tube)
6. Pillow Block Bearings
5. Rollers
4. Boom
10. Lift Cylinders
11. Guard Rail
7. HPU
8. Controls
12. Transverse Cylinder
15. Literature Compartment
1. Base Frame
2. Trolley
14. Fork Pocket
3. Wheels
9. Counter
Balance Valve