Fusion Equipment Safety
1 - 3
Electric Motors are Not Explosion Proof
Electric motors are not explosion proof.
Operation of these components in an explosive
atmosphere without necessary safety precautions
will result in serious injury or death.
See Section "Facer" in the Overview section for instructions on
removing brushes from facer motor.
TX02979-04-02-14
WR000
80
-4
-15-0
9
¡PELIGRO!
Pipe Handling Safety
Do not position yourself or any other personnel under
supported or raised pipe. Pipe is heavy and could
fall unexpectedly.
Pipe that is bent can store a great amount of energy.
Do not bend and force the pipe into the machine.
A bent pipe with stored energy can generate
tremendous force when that energy is released.
It is recommended that the pipe is always held securely by either
being clamped in the fusion machine jaws or properly attached to a
lifting device.
NOTICE:
Do not leave machine unattended to unauthorized
personnel. Do not allow unauthorized personnel to operate the
machine.
Keep persons that are not involved in handling pipe away from pipe
handling operations. Keep away from the pipe when the pipe and
handling equipment are in motion. When in motion, all persons
involved in handling pipe should be able to see all other persons
at all times. If any handling person is not in sight, immediately stop
moving equipment and pipe and locate that person. Do not continue
until all persons are accounted for and in sight.
Never push, roll, dump or drop pipe lengths, bundles or coils off the
delivery truck, off handling equipment, or into a trench. Always use
appropriate equipment to lift, move, and lower the pipe.
TX04882-04-18-16
WR000
97
-4
-17
-13
Summary of Contents for DynaMc 250HP
Page 44: ......
