McElroy Datalogger 4, Operator'S Manual Original Operating Instructions

Page: 17 / 40

3 - 7
Operation
Setup to Log a Joint (cont’d)
Joint Report Notes page allows viewing of the notes entered
prior to the joint being made, and the ability to append more
notes to the joint report.
To append more notes, tap the Append Notes... button on the
screen.
Tap Next >> to view the Front-end Plot
Tap << Back or press the Left Soft Key to go back to the previous
page.
The top box is read-only and it shows notes entered previously.
The bottom box is where characters for the new notes can be
entered. A total of 1000 characters are allowed per joint report.
New notes entered in this box will be appended to notes in the
read-only box above.
Use the scroll bar on the right side of the text boxes to scroll
through long messages.
After notes are entered, tap Save or press the Left Soft Key to
save the new notes.
Otherwise tap Cancel to discard the new notes and exit the
Append Notes screen without saving.
PH04626-2-13-12
PH04627-2-13-12