McElroy Datalogger 4, Operator'S Manual Original Operating Instructions

Page: 12 / 40

3 - 2
Operation
Main Menu
1) English - When a language other than English is used and
the “Toggle to English” feature is enabled, this menu item toggles the
display language to English.
2) Open... - Open a previously saved joint report for viewing.
3)
Settings...
- Change program settings:
a) Display language: English, Spanish, Portuguese, Russian,
Chinese (Simplified)
b) Pressure units: psi, bar, kg/cm², MPa
c) Temperature units: °F, °C
4)
About...
- Display the software and firmware version,
copyright information, computer serial number and pressure
calibration date and time.
5) Exit - Exit the DL4m software.
TX04394-2-29-12
Setup to Log a Joint
From the main screen, tap Setup... or push the Right Soft Key to begin.
Always make sure the time and date are correct before making a joint. If
time and date need adjustment, tap
Change Date and Time
.
Use the stylus to activate the onscreen keyboard by tapping the keyboard
symbol.
Operator ID and Job # can be letters or numbers up to 30 characters
each.
Joint # is digits-only, and it auto-increments after each completed joint.
Tap Next > > or push the Right Soft Key to setup machine, fusion type,
and specification.
PH04609-2-13-12
PH04976-11-14-13