
Operation
Prepare Heater
Heater is not explosion proof. Operation of
heater in an explosive atmosphere without
necessary safety precautions will result in serious
injury or death.
If operating in an explosive atmosphere, heater should be brought
up to temperature in a safe environment, then unplugged before
entering the explosive atmosphere for fusion.
NOTICE:
Place heater in insulated heater sling while allowing the
handle to remain outside the sling.
Plug heater into a proper power source.
Allow heater to heat to operating temperature.
Refer to the "Maintenance" section of this manual for instructions
how to adjust heater temperature.
TX04131-8-28-14
Install Clamping Inserts
Select and install appropriate clamping inserts for the pipe that is
being fused.
TX00368-9-15-94
CD0
20
40
-0
5-0
8-17
PH
04
24
2-
7-
7-
10
¡PELIGRO!
3 - 1
Read Before Operating
Before operating this machine, please read this manual
thoroughly, and keep a copy with the machine for future
reference.
The fusion procedures in this manual are for use with
polyethylene pipe. If fusing other thermoplastic pipe materials,
refer to the pipe manufacturer's suggested procedures or
appropriate joining standard.
TX02953-4-15-09
ST
OP
-12
-2
2-
92
PH
04
22
8-
7-
6-10