MCE Battery Charger for the iBook
Congratulations on your purchase of the MCE Battery Charger for the iBook.
The MCE Battery Charger for the iBook will charge two Li-Ion batteries for the
12.1-inch dual-USB iBook simultaneously in about 3.5 hours, giving you the
opportunity to use your iBook for extended periods while away from your home
or office.
The lightweight and compact design of the MCE Battery Charger for the iBook
make it easy to carry around wherever you take your computer.
Before you use the MCE Battery Charger
To remove the battery from your iBook, first turn the computer off and discon-
nect its power cord.
Close the iBook and then place it upside down by resting it on its top.
Turn the battery lock switch next to the battery clockwise to unlock the battery,
then lift the battery out of its compartment.
Using the MCE Battery Charger
Place the charger on a dry flat surface.
Connect the two halves of the chargerʼs power adapter together. Plug the ap-
propriate end of the power adapter into the back of the charger and the other end
to an electrical outlet.
Flip the power switch on the back of the charger to the on position, indicated by
the vertical bar on the switch.
Gently insert the iBook battery into an open slot on the charger.
Once the battery connector makes contact with the charger connector, the red
Charging LED will light up.
Charge Status
The status LED for each slot will provide the following feedback:
Red (constant) - the battery is charging.
Green - the battery is fully charged.
Blinking red - the charger has detected a battery error.
