Issue 3
13/01/21
2
Preface
An early adopter of the principal of domestic thermal stores, McDonald Water Storage
first started manufacturing thermal stores in early 1990s. Manufactured by our trained
coppersmiths and designed based upon the experiences of our technical team. The
McDonald Water Storage MULTI
flow
provides the perfect solution for mains pressure
hot water.
The MULTI
flow
Thermal Store Installation & Technical Manual should be read in
conjunction with the installation and servicing manuals issued by the manufacturer(s)
of the heat source(s) used within the thermal storage system.
This information provided is intended to provide support with the installation of the
MULTI
flow
thermal storage system. Responsibility for selection and specification of our
equipment remains that of our customer and any experts or consultants concerned with
the installation(s). Our full Terms & Conditions of Sale are available on request.
The MULTI
flow
thermal storage system is required to be fitted by a competent installer,
in accordance with
Building Regulations G
,
Gas Safety Regulations
, and the
Water
Fitting Regulations (England and Wales)
,
Water Fitting Regulations (Northern Ireland)
or
Water Byelaws (Scotland)
.
(Please note the MULTI
flow
overcomes Safety implications within
Building Regulations G3
relating to pressure and temperature discharge requirements, the installation of the MULTI
flow
may be notifiable to the relevant building control.)
