McDATA OPENconnectors, Command Line Interface Manual

Page: 108 / 170

2
CLI Commands
McDATA OPENconnectors Command Line Interface USER MANUAL P/N 620-000134-300 2-76
VKRZSRUWLQIR
6\QWD[
info
3XUSRVH
This command displays port information for all ports.
3DUDPHWHUV
This command has no parameters.
&RPPDQG([DPSOH
Root> show port info
2XWSXW
The port information data is displayed as a table that includes the
following properties.
2XWSXW([DPSOH
The output from the show.port.info command displays as follows.
Port WWN OpSpeed SpeedCap
---- ----------------------- -------- --------
0 10:00:80:00:11:22:33:44 1 Gb/sec 2 Gb/sec
1 10:00:80:01:11:22:33:44 1 Gb/sec 2 Gb/sec
2 10:00:80:02:11:22:33:44 1 Gb/sec 2 Gb/sec
3 10:00:80:03:11:22:33:44 1 Gb/sec 2 Gb/sec
4 10:00:80:04:11:22:33:44 2 Gb/sec 2 Gb/sec
5 10:00:80:05:11:22:33:44 2 Gb/sec 2 Gb/sec
6 10:00:80:06:11:22:33:44 2 Gb/sec 2 Gb/sec
7 10:00:80:07:11:22:33:44 2 Gb/sec 2 Gb/sec
8 10:00:80:08:11:22:33:44 2 Gb/sec 2 Gb/sec
9 10:00:80:09:11:22:33:44 2 Gb/sec 2 Gb/sec
10 10:00:80:10:11:22:33:44 1 Gb/sec 2 Gb/sec
11 10:00:80:11:11:22:33:44 1 Gb/sec 2 Gb/sec
12 10:00:80:12:11:22:33:44 1 Gb/sec 2 Gb/sec
13 10:00:80:13:11:22:33:44 1 Gb/sec 2 Gb/sec
14 10:00:80:14:11:22:33:44 1 Gb/sec 2 Gb/sec
15 10:00:80:15:11:22:33:44 1 Gb/sec 2 Gb/sec
Port The port number.
WWN The WWN of the port.
OpSpeed The current operating speed (1 Gb/sec,
2 Gb/sec, or Not Established).
SpeedCap The current transceiver capability speed
(1 Gb/sec or 2 Gb/sec).