6
8.5.
Using needle nose pliers, remove the worm
gear. See Figure 17.
8.6.
Using the tip of a small screwdriver, lift the rear
portion of the pump shaft from the housing. See
Figure 18.
8.7.
Remove the shaft from the oil pipe. Inspect the
shaft for damage. See Figure 19.
8.8.
Using a small screwdriver, remove the ends of
the two hoses from the housing. Inspect for
damage. See Figure 20.
Figure 17
Worm Gears
Figure 18
Pump Shaft Assembly
Figure 19
Figure 20
Hose Connector