4.
Place the twist grip in the engine start/stop position.
@
5.
Push the throttle lever completely forward, then remove
the throttle cable and casing from the retainer on the air
filter box.
@
6.
Loop the throttle cable around the retainer on the end
of the throttle lever, then remove the cable from the
holder.
@
7.
Deflate the rear tire.
8.
Remove
the cotter pin, cotter pin bolt and washers
located under the engine deck. ®
9. Press down on the flywheel section of the engine and
remove the engine spring.@
WARNING:
The spring will be under tension during
this procedur
e
.
10.
Loosen and remove the two engine support brace screws
and the engine cover brace. Rotate the support braces
downward. @
11.
Loosen and remove the engine attaching bolt.@
12.
Slowly pull the engine to the rear, guiding the engine
mounting boss between the three bracket screws.
®
8
