26
Maintenance Scheme (Track Components)
Daily Checks
Check track tension.
Check condition of gear motors.
Check track condition;
replace tracks when there is less than 10mm of tread remaining or
sooner if there are visible signs of deep cuts or cracks.
Check there are no stones or foreign bodies within the tracks, rollers, gears or sprockets.
Monthly Checks
Check oil level in gear unit.
Check rollers are correctly fastened.
Check there is no slack in the bearings.
Six Monthly Checks
Check wear and tear and overall condition of connections, pinions and lower rollers –
these
must be replaced when they reach their maximum wear limit; refer to ‘wear limits’ page.
Check brakes are working correctly.
Check all nuts and bolts for tightness.
Periodic Checks
Check brakes and safety warning decals are in good condition.
Make sure the machine is thoroughly cleaned on a regular basis.
Check all fastenings, supports, steel structural parts, welds and pins etc. are in good condition.
Ensure paintwork is kept in good condition.
Lubricate the tracked undercarriage every 20 working hours.
Hydraulic Hoses
Hoses and hydraulic connections should be inspected for signs of wear or damage on a regular
basis, damaged or worn components must be replaced immediately. The working life of
undamaged hoses is approximately six years, they should be replaced after this period.
Summary of Contents for RoboCut
