13
You can insert a new message between existing messages by
clicking once on a message below where you want to insert, press
the “Insert” button on your keyboard, this will bring up the I
2
C
Message Editor screen, set all information and click OK.
7. On the main screen, click on Send to transmit the current list
of I
2
C Master messages, with the option to auto repeat upon
completion, or send on INT assert (low). (iPort/AFM only)
Once the link has opened successfully, you are now an active I
2
C
node. Messages are entered into the message spreadsheet and
are transmitted upon clicking the Send button. Data received as
part of a Master Receive message replaces the 0xFF placeholders
in the message spreadsheet control.
If you get a “Slave Not Acknowledging” message in the
Communications Events window, this could mean you have the
wrong address in the I
2
C Destination Address, or the device is not
answering to its address.
