61
The received text is a representation of the data bytes within the Slave Receive
message. The format of this data is controlled by the current setting of the Hex Only
Display Control.
Prompt: /GRCtext[CR] ‘General Call Receive Complete
Command:
None Required
iPort/LAN Ready
Prompt: *
‘iPort/LAN 2 Ready
Cause: iPort/LAN 2 is ready for the next Host command.
Slave Not Acknowledging
Prompt: /SNA[CR]
‘Slave Not Acknowledging
Cause: There is no response (I
2
C Slave Address Acknowledgment) during a Master
Transmit or Receive operation from an I
2
C Slave device at the current Destination
I
2
C Address.
iPort/LAN Busy
Prompt: /I81[CR]
‘iPort/LAN 2 Busy
Cause: The host computer attempted a Master operation while iPort/LAN 2 was
busy. The host computer should wait for any previously issued command to
complete, process any pending slave events, and retry the last command.
I
2
C Bus Arbitration Loss
Prompt: /I83[CR]
‘I
2
C Arbitration Loss Detected
Cause: iPort/LAN 2 lost I
2
C Bus Arbitration to another bus master device while
Master Transmitting or Master Receiving an I
2
C message. Host should process any
active slave events and repeat the last command.
I
2
C Bus Error Detected
Prompt: /I84[CR]
‘I
2
C Bus Error Detected
