MC PMRL
Mobile Radio Router
MC Technologies GmbH, Kabelkamp 2, 30179 Hannover, Germany
Tel: +49 511 67 69 99-0, Website & Shop: www.mc-technologies.net, Email: [email protected]
10
7 Installation
The MC PMRL provides easy access to the Internet via the cellular network. For its
installation, a SIM card from your mobile network operator that has been activated for
parcel services (GPRS, UMTS, HSPA or LTE) is required.
Please follow the instructions step by step and configure the settings for the SIM
card. An incorrect PIN can lead to the SIM card being blocked.
7.1 Antenna
Mount the supplied antenna on connector "M1" of the MC PMRL. Check whether there is
sufficient local network coverage from your mobile phone provider.
A2 is for MIMO usage, also see 9.1 for further information
7.2 Inserting the SIM card
Insert your SIM card as shown in the figure below until it locks into place.
7.3 Power supply
The MC PMRL is operated with a supply voltage of 10 - 55V DC. Please connect an
external DC power supply with an output voltage of 10 - 55V DC to the power supply socket
"POW" (e.g. 12V > 1.2A or 24V > 600mA).
Please connect the power supply unit to the power supply or switch on the power supply. A
green "P" LED will light up
After a short initialization phase (approx. 30 seconds) the device is ready for operation.
7.4 Configuration via web interface
The MC PMRL can be configured to set mobile phone parameters (SIM pin, APN, etc.) via
an integrated web interface. To do this, connect the Ethernet interface of your PC and an
Ethernet interface of the MC PMRL (ETH1/ETH2/ETH3) with a network cable.
The PC must obtain its IP address automatically.
Open a browser on the PC. Firefox browser is preferred.
Using Chrome browser Luci
interface load slowly and often react only after repeated "refresh".
The MC PMRL can be reached via web interface using the IP address
192.168.0.1
.
For authentication, a user name and password must be entered. The default user
name and password here are "admin".
