Installation and use
SOLID CONTROL MCK 2200
9
4.1.2
Number of total plants
(REF. O6)
The number of total plants is displayed by pressing the "SELECT" key (ref. F) when
the arrow indicator appears in line with the "n° of total plants" symbol. Contrary to the
previous totaliser, this data cannot be reset.
4.1.3
Working pressure (ref. O7
)
It is the value read by the pressure transducer (optional) mounted in the atomiser. It
is displayed when the arrow indicator appears in line with the word "bar".
4.1.4
Distributed litres (ref. O8
)
To display the number of distributed litres, press the "SELECT" key (ref. F) by
positioning the arrow in line with the "distributed litres" symbol.
This function can only be used by using the flowmeter, which must be mounted in such
a way that there are no return circuits in the tank, downstream from this. To reset this
value, when it is shown on the display, keep the "SELECT" key pressed until "0"
appears on the display.
For the litres to be counted correctly, the constant "i" must be set correctly (see
paragraph ...).
4.1.5
Litres left (ref. O9
)
The outermost vertical segments at the top of the display indicate the function status
of the sonar sensors.
When the machine passes in front of the plant, the sonar detects it and sends an
electrical signal to the computer, which will turn on these segments ("O1" for the left
sonar and "O4" for the right sonar). They will remain on for as long as the sonar/s send
the signal.
4.1.6
Sensor status (ref. O1 and O4)
The outermost vertical segments at the top of the display indicate the function status
of the sonar sensors.
When the machine passes in front of the plant, the sonar detects it and sends an
electrical signal to the computer, which will turn on these segments ("O1" for the left
sonar and "O4" for the right sonar). They will remain on for as long as the sonar/s send
the signal.
