Installation and use
SEEDER MONITOR MCK 1200
14
6. Programming
6.1 Programming the working width
To program the working width press “width - PROG” key (rif. B, fig.1) and hold it
pressed until letter “L” starts flashing on the display.
Keeping “width - PROG” key pressed, hold down also “+” key (rif. A, fig.1) to
increase or “-” key (rif. C, fig.1) to decrease the displayed value, until the desired
value is obtained expressed in metres and centimetres, from 1.00 to 9.90 metres.
Picture 3 shows an example of working width programming.
1^ STEP
Press the key and hold it
pressed until the end of
programming
2^ STEP
Figure 3
LOGO
1
2
3
4
5
6
7
8
9
10
11
12
PR
O
G
. 2
"
IMP/100M
MCK 1200
