26
Operation
Sound-to-Light Control
• Switch it sound to light control (display Sund).
• Select the desired option of the selected operating mode.
• Set the music control sensitivity with the SOUND SENSITIVITY controller. Set this control so that the light effect
changes in time with the music.
Use with an External DMX Controller
Each DMX device in a DMX chain requires a so-called DMX start address to be clearly identified by the controller.
This DMX start address specifies the first DMX channel to which the effect light responds. The remaining control
channels come after this first DMX channel (DMX start address).
The effect light requires 4 free DMX channels.
Setting the DMX start address
• Press FUNC.
• Select DMX mode Addr with the UP and DOWN buttons.
• Confirm your selection with ENT.
• Press the button again to set the DMX start address.
• Select the desired start address A001-A512 with the UP and DOWN buttons.
• Confirm your selection again with ENT.
The following table provides information about the effects of the settings on the individual DMX channels:
DMX channel
Value
Function
1
000-255
Brightness red
2
000-255
Brightness green
3
000-255
Brightness blue
4
000-007
Lights off
008-190
Dimmer 0-100%
191-200
Sound-to-Light Control
201-247
Flash
248-255
continuous light
