MC Clean+ FM430, Operator'S Manual, Page: 7 / 11

- 7 -
3.0 How to prepare the machine for operation
Please pull off the power plug from electrical outlet before installing or replacing the pad
driver, brush and other attachments.
3.1 How to install brush or pad driver
Figure 1
Figure 2
Figure 3
To install brush pad, follow the steps on below:
1,Pull the level in Figure 1, and adjust the handle in the
suitable position for you,
2,Tilt the machine backward until the handle touches the
floor, see Figure 2,
3,Put your feet on each side of the machine, see Figure 2,
4,Align the lugs(1) on the locking plate into the brush pad
Opening(2), see Figure 3,
5,To lock the brush pad into position, turn the brush or pad
driver as indicated in Figure 2(A),
6,To unlock and remove the brush, turn the brush or pad
driver as indicated in Figure 2(B)
.
NOTE: To prevent any damage to the brush or
pad driver, remove the accessory while not in use.
Keep the brush in cool, dry place.