- 2 -
',(6(/02'(/
ENGINE
OIL DRAIN
15845
1. Check engine oil level.
2. Check fuel level.
3. Set engine speed control in the middle position.
4. Move decompression lever (if equipped) to the up
position. (Located on top of the engine)
5. Use key (if equipped) or starting handle to start
engine (Refer to engine instruction book for proper
“Manual Starting” procedure.)
6. After starting return engine speed control to the idle
position and allow engine to reach operation
temperature.
7. During operation run engine at full throttle, when
excessive kickback is noticed maximum compaction
has been reached.
8. To stop, return throttle to the idle position and allow
engine to idle for one minute then move control to
stop position.
DIESEL PLATE
OPERATING INSTRUCTIONS
15832
CAUTION
Machine may fall and cause
injury or damage if lifted
improperly.
15865
Lift only by lift hook
Weight~ #570 (259kg)
15848
WWW.MBW.COM
15874
M-B-W
FORWARD
REVERSE
14665
IDLE STOP RUN
THROTTLE
19493
HYDRAULIC OIL
15844
U.S. PATENT 7,165,469
19326 HYDRAULIC PLATE
CAUTION
Read the Operation Instructions before operating this
piece of equipment.
Keep unauthorized and untrained people away from this
equipment.
ROTATING & MOVING PARTS! Make sure all guards
and safety devices are in place.
DO NOT RUN this machine in an enclosed area. The
engine produces carbon monoxide, a POISONOUS
GAS.
Wear approved hearing protection, foot protection, eye
protection and head protection.
SHUT OFF the engine before servicing, cleaning or
adding fuel.
Failure to comply could result in serious bodily injury.
15867
Safety Decals: GPR78S (Decal Set #16031)
15848
WWW.MBW.COM
15874
M-B-W
#19493
#15844
#13484
#14665
#19326
#15846
#15846
#15845
#15848
#15848
#15874
#15874
#15832
#15865
(BOTH SIDES)
#15867
#12500
