SMARTING User Manual
– Release 11/03/2019
23
Figure 6.10
The main window interface when the sampling frequency is set to 250 Hz
6.7
Signal display
window
The click on the
show signals
button (number 21 from Figure 6.8) starts the
Signal display
window, as depicted in Figure 6.11. The
Signal display
window
shows the raw EEG signals from each electrode that was selected in the main
window.
The
Signal display
window allows visualizing the EEG (also gyroscope) signals
in real time. The red line (23) runs in front of the signals and denotes the
most recent samples. As mentioned earlier, if the impedances are switched
on, the color coded circles, that represent the impedance values, will appear
in the left part of the
Signal display
window, next to the electrode names
(22).