STOVE DESCRIPTION
Solid fuel stove for central heating
THERMO VULKAN
is produced and tested
according to the European standard EN 13240. On figure no. 1 given in the
introduction page, layout of the stove with integral parts important for handling is
displayed. Floor oven Thermo Vulkan has boiler of 24 liters capacity which is made
of boiler sheets with standard thickness. With production like this, life span of the
boiler increases. Water connections are 1“.Working area is consisted of cast plate
(fig. 1, pos. 5) with smoke exhaust connection (fig. 1, pos. 7) which is mounted on
the plate with two screws. Firebox area is built with bricks made of vermiculite.
Firebox door (fig.1, pos.8) are made of cast iron and has transparent glass. Ashtray
door (fig.1, pos.11) are made of cast iron and has manual air flow regulator.
Fig. 1. Integral parts of Thermo Vulkan
1 – natural stone
2 – secondary air flow regulator
3 – boiler
4 – cast iron grid
5 – thermo-regulator button
6 – ashtray
7 – smoke exhaust
8 – firebox door
9 – firebox door handle
10 – auxiliary air regulator
11 – ashtray door
12 – ashtray door handle
Central heating stoves are intended for heating of residential facilities. Integral part of
installation is thermal valve which serves as safety thermal valve against eventual
overheating. Recommended safety thermal valve is
Caleffi 544 ½,
displayed in fig.2.
Comment:
Thermal valve is not a part of the product and will not be delivered with it.
Guarantee for central heating stove is valid excusively with thermal valve installed.
