Fig. 7
During burning, turn regulator button into position of maximally opened flap in
direction shown on fig. 8. During operation, depending on temperature, regulator flap
will open and close automatically. If we want lower temperature then set, turn
regulator button in desired position of minimally open flap, and it closes. Button is to
be turned using auxiliary tools by putting longer side of the tool into the bed of the
button and turning, as necessary.
Fig. 8
If there are disturbances during heating (weak fuel, unsolved irregularities) by using
auxiliary regulator which is located on the front side of the ashtray door (fig. 1 pos.
11), we can bring additional primary air, for improved combustion.
CLEANING AND MAINTENANCE
Regular and proper cleaning enable proper operation and longer life span of the
stove.
Cleaning of external surfaces
– with soft cloth which will not damage stove
surfaces. Chemical cleaning agents may be used and don’t damage surfaces of the
stove. Do not clean colored and enameled surfaces with abrasive agents.
Cleaning of internal surfaces
–when clean, use protective gloves.
Clean internal walls of the burner against deposited smut, collect small and
unburned particles from the grid, clean ashtray and deposited ash within the stove.
Cleaning of glass surfaces
– firebox glass gets dirty during operation. For cleaning,
use soft detergents. Do not use abrasive agents since glass surface may get
damaged. Clean glass when it’s cold.
Cleaning and maintenance of the chimney
- cleaning and control of the chimney is
recommended at least once a year as well as after longer inactivity. Regular
maintenance and control of the chimney will prevent origination of fire and weak
operation.
