mbp MAGNUS 8000 HYDRAULIC, Instructions And Parts List, Page: 2 / 16

INDEX:
SAFETY WARNINGS ................................................
OPERATION .........................................................
CLEANUP .........................................................
MAINTENANCE .........................................................
TROUBLESHOOTING GUIDE .............................
TECHNICAL DATA ................................................
PARTS DRAWING AND LIST .............................
ACCESORIES ................................................
STANDARD SPRAY TIPS .......................................
WARRANTY ........................................................
2
4
6
7
9
10
10
14
15
16
2
SAFETY WARNINGS
ATTENTION
This equipment generates very high fluid pressure. High
pressure spray can cause serious injury. Read and understand
all instructions before operating.
Never point the spray gun at anyone or at any part of the body.
Never put hand, fingers over the spray tip.
Always have the tip guard in place on the spray gun while
spraying.
High pressure fluid in the hoses can be very dangerous. If the
hose develops a leak, split or rupture due to any kind of wear,
damage or misuse, the high pressure spray emitted from it can
cause a fluid injection injury or other serious bodily injury or
properly damage.
Never use a damaged hose
Tighten all fluid connections securely before each use. High
pressure fluid can dislodge a loose coupling or allow high
pressure spray to be emitted from the coupling.
Proper hose grounding continuity is essential to maintaining a
grounded spray system.
If any fluid appears to penetrate your skin, get emergency
medical care at once. Do not treat as a simple cut. Tell the
doctor exactly what fluid was injected.
All chemicals used in the pump must be compatible with the
wetted parts of the pump.
PRESSURE HAZARD
This pump can develope 240 bar working pressure. Be sure
that all spray equipment and accesories used are rated to
withstand this pressure. Do not exceed the maximum working
pressure of any component or accessory used in the system.
FIRE OR EXPLOSION HAZARD
Static electricity is created by the flow of fluid through the
pump and hose. If every part of the spray equipment is not
properly grounded, sparking may occur and the system may
become hazardous. Sparking may also occur when plugging in
or unplugging a power supply cord. Sparks can ignite fumes
from solvents and the fluid being sprayed, dust particles, whether
you are spraying indoors or outdoors, and can cause a fire or
explosion.