① Slicing the printing 3d model(STL format file) to gcode file (which can be read by the
printer) through MPrint software, copy the generated gcode file to USB Memory Disk or
SD Card, and insert it into the printer's slot which is on the left side of the touch screen.
② Select the Printing option,in the file directory, select the file you want to print, and it
will start printing.
③ You can cancel and pause printing during printing, or you can change the print
temperature and print speed with the operation options.
PRINTER SUPPORT Power-loss Recovery feature, After power-on again, the screen will
display the printing interface and you can click the resume button to continue last
printing job, you will have to wait for some time for heating the nozzle head and
heated bed.
*Matters needing attention
1. Please use tested original consumables, otherwise easy to cause the print head congestion.
Notice: You should put the platform on the printer's build stage first before printing.
MBot
3D Printer User Manual
2. Before building, make sure the build plate is fixed and clean.
3. Keep the machine away from any liquid. Or, it may get damaged.
4. The nozzle temperature is over 200°C when the printer is operating. Avoid touching.
5. ABS will produce a strong smell when building, so please keep ventilated.
6. Pause to change new filament when material is running out. You can even load filament during
building. Just remember DO NOT move the position of print head, otherwise the print will be destroyed.
