manualshive.com logo in svg

MBO ALPHA 2400 DECT, Instruction Manual

Share
Download
MBO ALPHA 2400 DECT Instruction Manual Download Page 44

43

BASE SETTING

FLASH TIME

BARRING

BASE MELODY

BASE RESET

BASE VOLUME

B–CHANGE PIN

SETTING DIAL

HANDY DESUB

F/R key

F/R key

F/R key

F/R key

F/R key

F/R key

F/R key

F/R key

O K key

BASE SETTINGS

BASE SETTINGS

You can change the base settings and the configuration
of the system in the base setting menu.

• If ”bASE SETTING” is displayed on the LCD and you press

the  [            ] 

key

, the ”SETTING dIAL” menu is displayed

after a moment of WAITING.

• If in an active menu mode you do not press a key for pro-

gramming the base set within 20 sec, the program re-
turns to stand-by mode. Pressing the call key [    ] also
returns to stand-by mode. In either case all unsaved
settings are lost.

• The ”bASE SETTING” menu cannot be called in the follo

wing cases:
1. If the base set is switched off or is out of range of the

handset, in which case ”WAITING” is displayed conti-
nuously on the handset LCD.

2. If the handset has not registered. 

The ”bASE SETTING” menu is skipped.

Base set programming
functions

Fig. 7

Summary of Contents for ALPHA 2400 DECT





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands