28
HANDSET SETTINGS
SELECTING
A BASE SET
This function selects from all base sets the base set (FP –
fixed part) with which the handset (PP – portable part)
has registered.
Up to four registrations are supported
at any one time. Only one base set can be selected.
The selection can be made automatically or manually.
Important:
Before you can select a base set for the handset the
handset must have registered with the base set (see page
32/33 ”Registering a handset”).
Remark:
If you select the option ”bASE NO : AUTO”, the base set
search proceeds automatically. If several base sets are
available, the handset selects any of them. This function
is only supported if the handset has already registered
with these base sets.
Selecting a base set
• Stand-by mode
• Press the [
F/R
]
key
to
display ”SELECT bASE”
on the LCD.
• Now press the [ ]
key
.
• The selected base set is
displayed, e.g.,
”bASE NO : 1”.
• Press the [
F/R
]
key
.
The displays ”bASE NO :
1-4, AUTO” appear on
the LCD in succession.
• When the number of the
required base set is dis-
played, e.g., ”bASE NO :
2”, press the [ ]
key
. This example assumes that the
handset has registered with base set 2 and has been
assigned number 1 ”MULTI 1”.
select base
base no: i
base no: 2
multi i