background image

PRIMAVERA

 USER MANUAL

p.

7

2.5  Other provisions

The first thing to do when starting use is to check the presence and integrity of the protections and the operation of the                   
safety devices. If you find any defects, do not use the pedal-assisted bicycle!

2.6  Unpacking and tuning

The pedal-assisted bicycle is delivered fully assembled and working.

2.6.1  Saddle adjustment

The adjustment of the height of the saddle is an essential prerogative for the correct use of the pedal-assisted bicycle.  
Incorrect adjustment can generate structural breaks to the frame.

Adjust the height of the saddle by operating the quick release mechanism (Ref. A – Figure 1). Check that the mechanism 
is tightened before testing the seat and using the medium. Do not lift the saddle beyond the limit sign placed in the tube
(Ref. B – Figure 1).

DANGER

IMPORTANT WARNING:

For your safety, the reference mark of 

the seatpost (B) tube should never be 

outside the tube where the seatpost tube 

is inserted.

ATTENTION

ASSEMBLY

In case that you do not have the appropri-

ate instrumentation for adjustment or do 

not have the capabilities, contact the au-

thorized dealer.

SHELTERS

It is strictly forbidden, therefore, to modify or remove the guards, controls, labels and indication plates .

DANGER

FIG. 1

Summary of Contents for PRIMAVERA 28









































Reviews: