10
(1) Scoring Position
Move V-Groove of Lower Scoring Roller to the place where scoring. Then, fix the
Roller by Philips Screw Driver. Press “Test” Key as leading edge of paper comes close to
Lower Scoring Roller so that scoring position is determined. Do not feed paper yet to the
rollers.
(2) Positioning of Upper Scoring Roller
Loosen (turn) Release/Fix screw (left) on the left side for 2 to 3 rounds. Turn
Shallow/Deeper screw counterclockwise 2 to 3 rounds. Slide the Upper Scoring Roller right
above the lower V-Groove. Turn Shallow/Deeper screw clockwise till Roller comes down in to
the bottom of V-Groove. Then, Fix the Scoring Block turning Release/Fix screw clockwise.
Now, Upper Blade and Lower Groove position is mechanically matched.
(3) Adjusting shallowness/depth of Upper Scoring Roller
Turn Shallower/Deeper screw counterclockwise for 2 to 3 turns. Then, fix the
height by Fix/Release screw.
3.6 Setting Scoring Block
SCORING UNIT
Upper Scoring Roller
V-Groove
Lower Scoring Roller
Height
Fix/Release
BLADE HEIGHT CONTROL
(Screw on right side)
Scoring Block
Shallower
①
②
Deeper
Summary of Contents for 1800S
Page 2: ...1 ...
