28
Discman 2
4 Working with the Discman
4.1 Connecting to the power supply
For an optimum workplace layout, route the power cable
down from the ceiling.
For safety reasons, the
Discman 4 / Discman free
will not
start automati-cally after a power outage when being used
with the power
supply unit. The
Discman 4 / Discman
free
has to be turned off and on
again.
4.2 Charging the battery
Charge the battery before you use the edge grinder for the first time; the battery will not reach full power
until it has been recharged multiple times.
Switching off the Discman.
To remove, press the lock and pull out the battery.
Insert the battery into the charger.
Plug in the charger and insert the terminals on the battery in line with
the labels on the charger.
After charging the battery, unplug the charger.
If you want to charge multiple batteries, you must leave a 15 minute
break between charging sessions.
4.3 Before commissioning
Before you start working, remove the locking bolt and the Allen key from the device!
1
2
28
Summary of Contents for Discman 4
Page 2: ......
Page 4: ...4 ...
Page 178: ...178 Discman 2 Slipestøvmagneten må derved ikke berøre skistopperen fremstilt med sirkel 178 ...