Amplifier
Amplifier
Amplifier
Before you start with the installation of the sound system, disconnect by any means the GROUND connection
wire from the battery, to avoid any risk of electric shock and short circuits.
REFERENCE NOTE
MECHANICAL INSTALLATION
Avoid any damage removing of the components of the vehicle like wires, cables, board computer, seat belts, gastank or the like.
Ensure that chosen location provide sufficient air circulation for the amplifier. Do not mount the device into small or sealed spaces without
air circulation near by heat dispersing parts or electrical parts of the vehicle.
Do not mount the amplifier on top of a subwooferbox or any other vibrating parts, thereby parts in the inside of the amplifier may get loosen.
The wires and cables of power supply and the audio signal must be as short as possible, to avoid any losses and interferences.
I N S T A L L A T I O N I N S T R U C T I O N S
NSC750
15
Vehicle
2
1
4
3
Pen or
peening tool
The mounting openings for the installation are located on
each corner of the amplifier. Please ensure during the
installation, that you don’t scratch or damage the amplifier
surface with the tools.
Uphold the amplifier to the chosen mounting location in
the vehicle. Then mark the four drill holes with a appropriate
pen or peening tool and lead through the mounting openings.
Observe that enough space remains for the installation of
the cables and ensure that they will not be bended and
have sufficient pull relief.
Put the amplifier aside and then drill the holes for the
mounting screws at the before marked locations.
Please ensure not to damage any components of the vehicle
while drilling the holes. Alternatively (depends on the material
of the surface) you can also use self-tapping screws.
Then uphold the amplifier to the chosen position and fix
the screws through the holes of the mounting brackets into
the drilled screwholes.
Ensure that the mounted amplifier is fixed tight and not get
loosen.
Mounting
screws
4 x
Vehicle
Drill (Ø 2 mm)
Marking
4 x
Mounting
opening
Vehicle
4 x
Summary of Contents for NANO NSC750
Page 24: ......
