22
©2020 Maxxsonics USA, Inc.
MOUNT THE USB & 3.5mm (AUX) DASH ADAPTER (Non-Ride Command)
With the non-Ride Command STAGE Tuned Audio packages, a PSAP-2S dual input waterproof dash
adapter is included. This means that no matter how you store and play your music, you have plenty of
connections.
STEP 1 – MOUNT ADAPTER
Route wires from the PSAP-2S input adapter through the switch opening
in the vehicle-specific panel where the source unit is already mounted.
Press the adapter into place to ensure the snaps lock it in.
STEP 2 – CONNECT TO SOURCE
There is an 18 inch (0.5 meter) cable that extends the USB and AUX
input from your source unit. After mounting the adapter, run the cable to
the source unit and connect the USB to the source unit connector and
the 3.5mm RCA connectors to the source unit AUX-1 input.
After the INITIAL TESTING and FINE TUNING process is complete, zip
tie and secure any excess cable length.
USB/AUX ADAPTER
