5
ENGLISH
•
The motor must rotate clockwise. If the rotation of three-phase motors is to
be inverted, by inverting the two power supply wires inside the plug, this must
be carried out by skilled personnel.
8) OPERATION OF THE APPLIANCE
PRELIMINARIES
Make sure the hopper is positioned correctly on the
appliance and fixed to the casing with the relevant pin
on the collar.
Close the locking slide and fill the hopper with coffee
beans. Open the locking slide so that the beans are
allowed to drop into the grinding system.
SWITCHING THE APPLIANCE ON AND OFF
GRINDER-DOSERS WITH MANUAL SWITCH AND COFFEE GRINDERS
The on-off switch is used to turn the appliance both on and off.
To switch on: set the switch to I.
To switch off: set the switch to O.
GRINDER-DOSERS WITH TIME SWITCH
In order to switch the appliance on, turn the timer knob clockwise.
The appliance switches off automatically. In order to switch it off manually, turn the
knob anticlockwise all the way.
AUTOMATIC GRINDER-DOSERS
In order to power up the appliance, turn the on-off switch knob to I. In order to
switch the appliance on manually, the switch knob must be turned all the way (to
START).The appliance starts automatically every 12 portions of coffee (every 6
portions in the versions with shorter doser group). It switches off automatically
when the doser is filled with ground coffee.
In order to switch off the appliance manually, set the on-off switch knob to O.
ADJUSTING GRINDING
In order to achieve finer or coarser
grinding, the adjustment disk located
under the hopper must be adjusted
using the relevant handle.
In order to increase the coarseness
of the ground coffee, the disk must be
rotated clockwise; to decrease, turn
the disk anticlockwise.
LOCKING
SLIDE
HOPPER
OPEN
COARSER GRINDING
FINER GRINDING
