User Manual of Network Zoom Camera
6
then try again.
5.
Change the device IP address to the same subnet with your computer by either modifying
the IP address manually or checking the
Enable DHCP
checkbox.
Figure 2-5
Modify the IP Address
6.
Input the password and click
Modify
to activate your IP address modification.
The batch IP address modification is supported by the SADP. Refer to the user manual of
SADP for details.
Activation via Client Software
The client software is versatile video management software for multiple kinds of devices.
Get the client software from the supplied disk or the official website, and install the software
according to the prompts. Follow the steps to activate the camera.
Steps:
1.
Run the client software and the control panel of the software pops up, as shown in the
figure below.
