Mazda PROTEGE 5 Maintenance And Care Download Page 20 | Manualshive

Page: 20 / 52

background image

Black plate (353,1)

CAUTION

Ø

Radiator coolant will damage
paint.
Rinse it off quickly if spilled.

Ø

Use only soft (demineralized)
water in the coolant mixture.
Water that contains minerals will
cut down on the coolant's
effectiveness.

Ø

Do not add only water. Always
add a proper coolant mixture.

Ø

The engine has aluminum parts
and must be protected by an
ethylene-glycol-based coolant to
prevent corrosion and freezing.

Ø

DO NOT USE coolants Containing
Alcohol, methanol, Borate or
Silicate.
These coolants could damage the
cooling system.

Ø

DO NOT MIX alcohol or methanol
with the coolant. This could
damage the cooling system.

Ø

Do not use a solution that
contains more than 60%
antifreeze.
This would reduce effectiveness.

If the coolant reservoir is empty or new
coolant is required frequently, consult an
Authorized Mazda Dealer.

Brake/Clutch Fluid

q

Inspecting Brake/Clutch Fluid Level

The brakes and clutch draw fluid from the
same reservoir.
Inspect the fluid level in the reservoir
regularly. It should be kept at MAX.
The level normally drops with
accumulated distance, a condition
associated with wear of brake and clutch
linings. If it is excessively low, have the
brake/clutch system inspected by an
Authorized Mazda Dealer.

Maintenance and Care

Owner Maintenance

8-23

Mazda5_8CN3-EA-12I_Edition1 Page353
Tuesday, September 4 2012 1:25 PM

Form No.8CN3-EA-12I

«
...
18
19
20
21
22
...
»

Summary of Contents for PROTEGE 5





















































Reviews:

No comments

Related manuals for PROTEGE 5

Brand: ZAPTEC Pages: 64

Brand: ZAPTEC Pages: 24

Retrotech RTX-68D-CHG

Brand: Dakota Digital Pages: 4

Transit Vancouver Wagon

Brand: Webasto Pages: 44

Brand: Audi Pages: 12

Brand: Actia Pages: 37

Car Cup Holder Phone Mount

Brand: UGREEN Pages: 9

Code Alarm PROFESSIONAL SERIES CA 5550SST

Brand: Audiovox Pages: 14

Brand: ACV Pages: 2

Brand: Audi Pages: 63

Brand: Subaru Pages: 2

Brand: Axxess Pages: 4

Brand: Menabo Pages: 4

Brand: Jackson Racing Pages: 14

Brand: AL-KO Pages: 88

Brand: HG2 Pages: 6

Brand: Suzuki Pages: 190

200 Convertible

Brand: Chrysler Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands