27
NOTE:
You will need an audio cable with an 1/8 inch (3.5 mm)
mini stereo plug (available as a Genuine Mazda accessory) to
connect your portable audio player into the AUX jack.
IMPORTANT:
• Set the volume level on your portable audio player to the highest level before
distortion starts, then use the vehicle’s audio system to adjust the volume.
• Unplug any device from the USB port and accessory socket before turning off
the vehicle. Leaving devices plugged in can drain the battery and cause issues
during the Bluetooth pairing process at startup. Wait about 15 seconds after
starting the vehicle before plugging anything into the USB port.
1
Locate the USB port or AUX jack.
2
Connect the device plug into the portable audio player and into the
USB port or AUX jack.
3
Turn the vehicle audio system on.
4
Audio Controls (without Mazda Connect):
Push the MEDIA button
on the audio unit to switch to the AUX or USB mode.
Audio Controls (with Mazda Connect):
Select AUX or USB from the
Sources menu.
5
USB Port:
Use the vehicle’s audio system or steering wheel controls to
control the connected USB device.
AUX Jack:
Use the portable audio player controls to play music.
Refer to the Owner’s Manual for additional information.
PORTABLE AUDIO PLAYER INTEGRATION
USING THE USB PORT OR AUX JACK
Your vehicle is equipped with a USB port and auxiliary
AUX jack, conveniently located in the center console,
that allows you to play your iPod, USB device, or
portable audio player through the vehicle’s audio
system. The center console is useful for storing your
personal media/phone devices. Learn the system when
parked and do not let it distract you while driving.
12 VOLT ACCESSORY SOCKET
The 12 volt accessory socket is located under
the dash, deep in the back of the footwell on the
passenger side close to the center console. It is
on with ignition on.
Audio USB and AUX Inputs
2665980 17b Mazda MX5 SSG 080116.indd 27
8/1/16 12:41 PM
